Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1796 / 2354

show policy service group QoS Policy Commands
page 26-156 OmniSwitch CLI Reference Guide March 2011
show policy service group
Displays information about pending and applied policy service groups.
show [applied] policy service group [service_group]
Syntax Definitions
applied Indicates that only service groups that have been applied should be
displayed.
service_group The name of the service group for which you want to display informa-
tion; or a wildcard sequence of characters for displaying information
about service groups with similar names. Use an asterisk (*) to indicate
a wildcard character.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Information for all policy service groups displays unless service_group is specified.
Examples
-> show policy service group
Group Name : mgmt
State = new,
Entries = ftp,
http,
https,
snmp,
ssh,
telnet
output definitions
Group Name The name of the port group, configured through the policy service
group command.
State This field appears if the group was created or modified but not yet
applied to the QoS configuration. When the
qos apply command is
issued, this field no longer displays.
Entries The services associated with the group. Services are configured through
the
policy service command.