Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1923 / 2354

Learned Port Security Commands clear violation
OmniSwitch CLI Reference Guide March 2011 page 30-21
clear violation
Clears all the MAC address violation logs for a particular port and session.
clear violation {port slot/port[-port2] | linkagg agg_num[-agg_num2]}
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
-port2 The last port number in a range of ports you want to configure on the
same slot (for example, 3/1-4 specifies ports 1-4 on slot 3).
agg_num Enter a link aggregate ID number.
-agg_num2 The last aggregate ID number in a range of link aggregate ports.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
When a violation is set on a physical port that is part of a link aggregate, the violation is set for the
whole link aggregate. All ports on that link aggregate is brought down. This command can be applied
to the link aggregate IDs to activate all the ports of the link aggregates.
•
If physical or link aggregate ports are simulated down, toggle the link to clear the violation.
Examples
-> clear violation port 1/10
-> clear violation linkagg 10-20
Release History
Release 7.1.1; command introduced.