Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1121 / 2354

BGP Commands show ip bgp dampening
OmniSwitch CLI Reference Guide March 2011 page 19-153
show ip bgp dampening
Displays the BGP route dampening settings.
show ip bgp dampening
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command shows the setting for dampening on the router, assuming it is enabled.
Examples
-> show ip bgp dampening
Admin Status = disabled,
Half life value (seconds) = 300,
Reuse value = 200
Suppress value = 300,
Max suppress time (seconds) = 1800,
Release History
Release 7.1.1; command was introduced.
output definitions
Admin Status Indicates whether route dampening is enabled or disabled. This value
is configured through the
ip bgp dampening command.
Half life value The half-life interval, in seconds, after which the penalty value for a
reachable route will be reduced by half. This value is configured
through the
ip bgp dampening command.
Reuse value The value that the route flapping metric must reach before this route is
re-advertised. This value is configured through the
ip bgp dampening
command.
Suppress value The number of route withdrawals necessary to begin readvertising a
previously suppressed route. This value is configured through the
ip
bgp dampening command.
Max Suppress time The maximum time (in seconds) that a route will be suppressed. This
value is configured through the
ip bgp dampening command.