Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 389 / 2354

802.1AB Commands lldp tlv management
OmniSwitch CLI Reference Guide March 2011 page 9-11
lldp tlv management
Specifies the switch to control per port management TLVs to be incorporated in the LLDPDUs.
lldp {port slot/port [-port ] | slot slot | chassis} tlv management {port-description | system-name |
system-description | system-capabilities | management-address} {enable | disable}
Syntax Definitions
slot/port Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
slot The slot number for a specific module.
port-description Enables or disables the transmission of port description TLV in
LLDPDU.
system-name Enables or disables the transmission of system name TLV in LLDPDU.
system-description Enables or disables transmission of system description TLV in
LLDPDU.
system-capabilities Enables or disables transmission of system capabilities TLV in
LLDPDU.
management-address Enables or disables transmission of management address on per port.
enable Enables management TLV LLDPDU transmission.
disable Disables management TLV LLDPDU transmission.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The LLDPDU must be enabled and set to transmit before using this command.
•
If this command is applied to a slot or chassis, then the existing configuration related to this command
is lost.
Examples
-> lldp port 1/2 tlv management port-description enable
-> lldp slot 2 tlv management management-address enable
-> lldp slot 3 tlv management system-name disable
-> lldp chassis tlv management system-capabilities enable
parameter default
enable | disable disable