Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 112 / 2354

mac-learning vlan static mac-address Source Learning Commands
page 3-4 OmniSwitch CLI Reference Guide March 2011
mac-learning vlan static mac-address
Configures a static destination unicast MAC address. The configured MAC address is assigned to a fixed
switch port or link aggregate ID and VLAN. If the destination of the data packets received on the VLAN
ports is the configured MAC address, then they are forwarded to the specific MAC address port.
mac-learning vlan vlan_id {port slot/port | linkagg linkagg_id} static mac-address mac_address
[bridging | filtering]
no mac-learning {vlan vlan_id [port slot/port | linkagg linkagg_id]} {static | dynamic} [mac-address
mac_address]
Syntax Definitions
vlan_id VLAN ID number.
slot/port Enter the slot number for the module and the physical port number on
that module (for example, 3/1 specifies port 1 on slot 3).
linkagg_id Enter a link aggregate ID number. See Chapter 6, “Link Aggregation
Commands.”
static Specifies a permanent static MAC address that is retained even after the
switch reboots.
dynamic Specifies a dynamic MAC address that is removed when the switch
reboots.
mac_address Enter the destination MAC Address to add to the MAC Address Table
(for example, 00:00:39:59:f1:0c).
bridging Specifies that all packets to or from this MAC address are bridged.
filtering Specifies that all packets to or from this MAC address are filtered or
dropped.
Defaults
Platforms Supported
OmniSwitch 10K
parameter default
bridging | filtering bridging