Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1636 / 2354

show qos qsi stats QoS Commands
page 25-76 OmniSwitch CLI Reference Guide March 2011
Red
Accepted-Packets : 720,
Discarded-Packets : 240
-> show qos qsi port 1/1 qi-id 3 stats
Port 1/1
QSAP: 1, Parent: 1, Admin: Ena
QSI 1
QSP: 1, Name: qsp-1, Type: Default,
WRP: 1, Name: wrp-1, Admin: Dis, Oper: Dis,
Scheduler: Qspec, Stats-Admin: Dis, Stats-Oper: Dis
BW
Admin (%): 100, Oper (Mbps): 0
QI 3
Qtype: SP5, Stats-Admin: Dis, Stats-Oper: Dis
WRP: 1, Name: wrp-1, Admin: Dis, Oper: Dis,
CIR
Admin (%): 0, Oper (Mbps): 0
PIR
Admin (%): 100, Oper (Mbps): 0
Scheduler
Enqueued-Packets : 10,
Dequeued-Packets : 8,
Dropped-Packets : 102
Green
Accepted-Packets : 90,
Discarded-Packets : 30
Yellow
Accepted-Packets : 90,
Discarded-Packets : 30
Red
Accepted-Packets : 90,
Discarded-Packets : 30
output definitions
QSAP The QSet attachment point (QSAP) ID number. This is a logical entity
generated internally by the switch to identify the association between a
QSet instance and a port or link aggregate. The QSAP is not config-
urable at this time.
Parent The parent QSAP ID. If the parent ID is different than the QSAP ID,
then the port is a member of a link aggregate.
Admin The administrative status of the QSAP.
QSI The QSet instance (QSI) ID number, internally generated by the switch.
QSP, Name, Type The QSet profile (QSP) ID number and name associated with the QSI.
Configured through the
qos qsi command. Also indicates the type of
QSP, which is one of the pre-defined, default profiles (QSP 1–4) cur-
rently supported. User-configured, dynamic profiles are not supported
at this time.
WRP, Name, Admin, Oper The WRED profile (WRP) ID number associated with the QSet profile
that is assigned to the QSI. Configured through the
qos qset command
Also indicates the administrative and operational status of the WRP for
the QSI. The WRP administrative status for the QSI is configured
through the
qos qsi command.