Link Aggregation Commands
linkagg range
OmniSwitch CLI Reference Guide
March 2011
page 6-51
linkagg range
Modifies the range of standard and MC-LAG link aggregation identifiers.
linkagg range local
{
agg_num-agg_num | none
}
peer
{
agg_num-agg_num | none
}
multi-chassis
{
agg_num-agg_num | none
}
Syntax Definitions
agg_num
The first or last identifier in the range.
local
The range of standard local aggregate identifiers.
peer
The range of standard peer aggregate identifiers.
multi-chassis
The range of MC-LAG aggregate identifiers.
none
No aggregate identifiers range is specified.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use this command in conjunction with the MC-LAG feature to change the maximum number of MC-
LAG link aggregates that can be configured.
•
The switch must be rebooted for the ranges to take affect.
•
The maximum number of combined standard and MC-LAG link aggregates is 128.
Examples
-> linkagg range local 0-9 peer 10-19 multi-chassis 20-127
-> linkagg range local none peer none multi-chassis 0-127
Release History
Release 7.1.1; command introduced.
parameter
default
local
0-47
peer
48-95
multi-chassis
96-127
Summary of Contents for 060321-10, Rev. B
