Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1393 / 2354

DVMRP Commands ip dvmrp route-holddown
OmniSwitch CLI Reference Guide March 2011 page 22-13
ip dvmrp route-holddown
Configures the time during which DVMRP routes are kept in a hold down state. A holddown state refers
to the time that a route to an inactive network continues to be advertised.
ip dvmrp route-holddown seconds
Syntax Definitions
seconds Specifies the holddown time, in seconds (1–86400).
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> ip dvmrp route-holddown 120
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaDvmrpGlobalConfig
alaDvmrpRouteHoldDown
parameter default
seconds 120
ip dvmrp route-timeout Configures the route expiration timeout value.
show ip dvmrp Displays the global DVMRP parameters.
show ip dvmrp route Displays the DVMRP routes that are being advertised to other
routers.