Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 423 / 2354

IP Commands ip interface
OmniSwitch CLI Reference Guide March 2011 page 10-5
ip interface
Configures an IP interface to enable IP routing on a VLAN or allow remote access. Without an IP inter-
face, traffic is bridged within the VLAN or across connections to the same VLAN on other switches.
ip interface {name | emp} [{address | vip-address} ip_address] [mask subnet_mask] [admin-state
[enable | disable]] [vlan vlan_id] [forward | no forward] [local-proxy-arp | no local-proxy-arp] [e2 |
snap] [primary | no primary]
no ip interface name
Syntax Definitions
name Text string of interface name. Use quotes around string if description
contains multiple words with spaces between them (e.g. “Alcatel-Lucent
Marketing”). Note that this value is case sensitive.
emp Modifies the shared EMP port IP address.
address ip_address An IP host address (e.g. 10.0.0.1, 171.15.0.20) to specify the IP router
network.
vip-address ip_address An IP host address for a Virtual IP (VIP) VLAN. This type of IP
address is used only in a Multi-Chassis Link Aggregation (MC-LAG)
configuration.
subnet_mask A valid IP address mask (e.g., 255.0.0.0, 255.255.0.0) to identify the IP
subnet for the interface.
enable Enables the administrative status for the IP interface.
disable Disables the administrative status for the IP interface.
vlan_id An existing VLAN ID number (1–4094). Specify a multi-chassis VLAN
ID if the IP interface is for a VIP VLAN.
forward Enables forwarding of IP frames to other subnets.
no forward Disables forwarding of IP frames. The router interface still receives
frames from other hosts on the same subnet.
local-proxy-arp Enables Local Proxy ARP on the specified interface.
no local-proxy-arp Disables Local Proxy ARP on the specified interface.
e2 Enter e2 or ethernet2 to specify Ethernet-II encapsulation.
snap SNAP encapsulation.
primary Designates the specified IP interface as the primary interface for the
VLAN.
no primary Removes the configured primary IP interface designation for the
VLAN. The first interface bound to the VLAN becomes the primary by
default.