Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1658 / 2354

policy port group QoS Policy Commands
page 26-18 OmniSwitch CLI Reference Guide March 2011
•
If the snapshot command is entered after the policy port group command is configured, the resulting
ASCII file will include the following additional syntax for the policy port group command:
from {cli | ldap | blt}
This syntax indicates how the port group was created. The cli and ldap options may be changed by a
user modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in object, this setting is not configurable.
Examples
-> policy port group port_group4 3/1-2 4/3 5/4
-> policy port group port_group4 no 3/1-2
-> policy port group UserPorts 4/1-8 5/1-8
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaQoSPortGroupsTable
alaQoSPortGroupsName
alaQoSPortGroupsSource
alaQoSAppliedPortGroupsTable
alaQoSAppliedPortGroupsName
alaQoSAppliedPortGroupsSource
alaPortGroupTable
alaQoSPortGroupSlot
alaQoSPortGroupPort
alaQoSPortGroupPortEnd
alaAppliedPortGroupTable
alaQoSAppliedPortGroupSlot
alaQoSAppliedPortGroupPort
alaQoSAppliedPortGroupPortEnd
policy condition Configures a policy condition. A port group may be configured as part
of a policy condition.
qos apply Applies configured QoS and policy settings to the current configuration.
policy action maximum
bandwidth Configures a maximum bandwidth value for a policy action.
show policy port group Displays information about policy port groups.