Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 524 / 2354

show ip redist IP Commands
page 10-106 OmniSwitch CLI Reference Guide March 2011
show ip redist
Displays the IPv4 route map redistribution configuration.
show ipv6 redist [rip | ospf | bgp]
Syntax Definitions
rip Displays route map redistribution configurations that use RIP as the
destination (into) protocol.
ospf Displays route map redistribution configurations that specify OSPF as
the destination (into) protocol.
bgp Displays the route map redistribution configurations that specify BGP as
the destination (into) protocol at this time.
Defaults
By default all route map redistribution configurations are shown.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Specify a destination protocol with this command to display only those configurations that redistribute
routes into the specified protocol.
Release History
Release 7.1.1; command introduced
Examples
-> show ip redist
Source Destination
Protocol Protocol Status Route Map
------------+------------+---------+--------------------
RIP OSPF Enabled ipv4rm
BGP RIP Enabled ipv4rm
-> show ip redist rip
Source Destination
Protocol Protocol Status Route Map
------------+------------+---------+--------------------
BGP RIP Enabled ipv4rm