Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1536 / 2354

show ipv6 pim sgroute PIM Commands
page 23-122 OmniSwitch CLI Reference Guide March 2011
show ipv6 pim sgroute
Displays all (S,G) state that the IPv6 PIM has.
show ipv6 pim sgroute [source_address group_address]
Syntax Definitions
source_address The IPv6 address for a specific multicast source.
group_address A IPv6 multicast address.
Defaults
By default, entire (S,G) routing table is displayed. To view the detailed information for a particular (S,G)
entry, use the
source_address and group_address associated with that entry.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
When the source_address and group_address is specified in the command line, the detailed informa-
tion displayed also includes the detailed state of every outgoing interface.
•
If an IPv6 address is not specified, the current PIM status for all multicast route entries are displayed.
Examples
-> show ipv6 pim sgroute
Legend: Flags: D = Dense, S = Sparse, s = SSM Group,
L = Local, R = RPT, T = SPT, F = Register,
P = Pruned, O = Originator
Total 1 (S,G)
Source Address Group Address RPF Interface UpTime Flags
---------------------+---------------------+----------------+-----------+------
8ffe::3 ff0e::7 00h:01m:34s SR
-> show ipv6 pim sgroute 8ffe::3 ff0e::7
(8ffe::3,ff0e::7)
UpTime = 00h:01m:40s
PIM Mode = ASM,
Upstream Join State = Not Joined,
Upstream RPT State = Not Pruned,
Upstream Join Timer = 00h:00m:00s,
Upstream Neighbor = none,
SPT Bit = False,
DR Register State = No Info,
DR Register Stop Timer = 00h:00m:00s,
Interface Specific State: