Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1214 / 2354

ip slb cluster Server Load Balancing Commands
page 20-6 OmniSwitch CLI Reference Guide March 2011
•
SLB clusters are not active if the Server Load Balancing feature is disabled for the switch. Use the ip
slb admin-state command to enable this feature.
Note
It is possible to configure clusters and add or remove servers from a cluster even when SLB is disabled for
the switch
.
Examples
-> ip slb cluster corporate_servers vip 1.2.3.4
-> ip slb cluster "mail servers" vip 1.2.3.6
-> ip slb cluster cluster_1 condition intranet_cond l2
-> ip slb cluster cluster_2 condition slb_cond l3
-> no ip slb cluster hr_servers
Release History
Release 7.1.1; command introduced.
Related Commands
MIB Objects
slbClusterTable
slbClusterName
slbClusterVIP
slbClusterRowStatus
slbClusterPackets
slbClusterCondition
slbClusterType
show ip slb clusters Displays the status and configuration of all Server Load Balancing clus-
ters on a switch.
show ip slb cluster Displays detailed status and configuration information for a single
Server Load Balancing cluster on a switch.
ip slb admin-state Enables or disables Server Load Balancing on a switch.
ip slb server ip cluster Adds, deletes, or modifies parameters of physical servers in logical
Server Load Balancing clusters.