Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1116 / 2354

show ip bgp BGP Commands
page 19-148 OmniSwitch CLI Reference Guide March 2011
show ip bgp
Displays the current global settings for the local BGP speaker.
show ip bgp
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Most of the parameters in this display can be altered through BGP global commands. See the output defi-
nitions below for references to the CLI commands used to configure individual parameters.
Examples
-> show ip bgp
Admin Status = disabled,
Operational Status = down,
Autonomous system Number = 1,
BGP Router Id = 128.0.1.4,
Confederation Id = 0,
IGP Synchronization Status = disabled,
Minimum AS origin interval (seconds) = 15,
Default Local Preference = 100,
Route Reflection = disabled,
Cluster Id = 0.0.0.0,
Missing MED Status = Best,
Aspath Comparison = enabled,
Always Compare MED = disabled,
Fast External Fail Over = disabled,
Log Neighbor Changes = disabled,
Multi path = disabled,
Graceful Restart = enabled,
Graceful Restart Status = Not Restarting,
Configured Graceful Restart Interval = 90s,
IPv4 Unicast = enabled,
IPv6 Unicast = disabled
output definitions
Admin Status Indicates whether the BGP protocol has been enabled or disabled
through the
ip bgp admin-state command.
Operational Status Indicates if the local BGP speaker is actively participating in BGP
messages, update, routing advertisements.