Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 2172 / 2354

whoami Session Management Commands
page 41-20 OmniSwitch CLI Reference Guide March 2011
whoami
Displays the current user session.
whoami
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the who command to display all sessions on the switch.
Examples
-> whoami
Session number = 5
User name = admin,
Access type = telnet,
Access port = NI,
IP address = 121.251.17.76,
Read-only domains = None,
Read-only families = ,
Read-Write domains = All ,
Read-Write families = ,
output definitions
Session Number The session number assigned to the user.
User name User name.
Access type Type of access protocol used to connect to the switch.
Access port Switch port used for access during this session.
Ip Address User IP address.
Read-only domains The command domains available with the user’s read-only access.
Read-only families The command families available with the user’s read-only access.
Read-Write domains The command domains available with the user’s read-write access.
Read-Write families The command families available with the user’s read-write access.