®
7-Slot Chassis Quick
Installation Guide
For the CoreBuilder
™
9000 Enterprise Switch
Read this document before you attempt to install the 7-slot chassis
(Model Number 3CB9E7).
This guide is intended for the system or network administrator who is
responsible for installing and managing the network hardware.
WARNING:
The CoreBuilder
™
9000 chassis must be installed, removed,
or replaced only by trained service personnel. Do not attempt to install,
remove, or replace a CoreBuilder 9000 chassis if you have not had the
proper training from 3Com. For a complete guide to 3Com’s training
offerings, call 1-800-NET-3COM, then press option 2. Outside the
United States, contact your local 3Com office.
This document explains how to unpack and install a CoreBuilder 9000
7-slot chassis.
WARNING:
You can install the CoreBuilder 9000 7-slot chassis on a
table or a shelf, or into a rack. To minimize the risk of personal injury
or equipment damage, 3Com recommends that at least two people
perform a chassis installation.
For additional chassis preinstallation information, read Appendix C in
the
CoreBuilder 9000 Enterprise Switch Getting Started Guide
.
