PIM Commands
ipv6 pim ssm group
OmniSwitch CLI Reference Guide
March 2011
page 23-77
ipv6 pim ssm group
Statically maps the specified IPv6 multicast group(s) to the PIM Source Specific Multicast mode (SSM).
ipv6 pim ssm group group_address/prefix_length [[no] override] [priority
priority]
no ipv6 pim ssm group group_address/prefix_length
Syntax Definitions
group_address
Specifies the IPv6 multicast group address.
/prefix_length
Specifies the prefix length of the IPv6 multicast group. Values may
range from 4 to 128.
override
Specifies the static SSM mode mapping configuration to override the
dynamically learned group mapping information for the specified
group(s).
priority
Specifies the preference value to be used for this static SSM mode
configuration and provides fine control over which configuration is
overridden by this static configuration
.
Values may range from 0 to 128.
Defaults
By default, the priority option is not set and the override option is set to false.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the
no
form of this command to remove a static configuration of a Source Specific Multicast mode
group mapping.
•
The IPv6 PIM Source-Specific Multicast (SSM) mode for the default SSM address range (FF3x::/32)
reserved by the Internet Assigned Numbers Authority is not enabled automatically and must be config-
ured manually to support SSM.
•
You can also map additional IPv6 multicast address ranges for the SSM group using this command.
However, the IPv6 multicast groups in the reserved address range can be mapped only to the SSM
mode.
•
If the group prefixes configured for two or more rows in this table overlap, the row with the greatest
prefix length value is used for the overlapping range
•
Specifying the priority value obsoletes the
override
option and once the priority option has been
defined,a value of 65535 can be used to un-set the priority.
Examples
-> ipv6 pim ssm group ff30::1234:abcd/128 priority 50
-> no ipv6 pim ssm group ff30::1234:abcd/128
Summary of Contents for 060321-10, Rev. B
