Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1590 / 2354

qos port QoS Commands
page 25-30 OmniSwitch CLI Reference Guide March 2011
qos port
Configures QoS parameters for a physical port. This section describes the base command with a single
required option (
slot/port ).
In lieu of these options, the base command ( qos port ) may be used with other keywords to set up a QoS
configuration on a per port basis. These keywords are listed here and described as separate commands later
in this chapter. In addition, some keywords have a
no form to remove the parameter or return it to its
default.
qos port slot/port[-port]
[trusted]
[maximum egress-bandwidth bps]
[maximum ingress-bandwidth bps]
[maximum depth bps]
[default 802.1p value]
[default dscp value]
[default classification {802.1p | tos | dscp}]
Syntax Definitions
slot/port[-port] The physical slot and port number. Use a hyphen to specify a range of
ports (4/1-8).
Defaults
•
All ports are untrusted.
•
By default, QoS ports do not preempt queues of lower priority.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the trusted option to change the trust mode for the port.
Examples
-> qos port 3/1 trusted
-> qos port 4/2 no trusted
Release History
Release 7.1.1; command was introduced.