Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 2222 / 2354

sftp File Management Commands
page 42-34 OmniSwitch CLI Reference Guide March 2011
sftp
Starts an SFTP session. An SFTP session provides a secure file transfer method.
sftp [options] {host_name | ip_address}
Syntax Definitions
options Press “Enter” on the command line to get a list of options.
host_name Specifies the host name for the SFTP session.
ip_address Specifies the IP address for the SFTP session.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
You must have a valid username and a password for the specified host.
•
After logging in, SFTP commands are supported. Some of these commands are defined in the follow-
ing table:
cd path Change remote path to ‘path’.
lcd path Change local directory to ‘path’.
chmod mode path Change permissions of file ‘path’ to ‘mode’.
help Display command help information.
get remote-path [local path] Download a file from the remote path to the local path.
lls [path] Display local directory listing.
ln oldpath newpath Creates a symbolic link (symlink) to the remote file.
symlink oldpath newpath Creates a symbolic link (symlink) to the remote file.
lmkdir path Create local directory.
lpwd Print local working directory.
ls [path] Display remote directory listing.
mkdir path Create remote directory.
put local-path [remote-
path] Upload file.
pwd Display remote working directory.
exit Quit the sftp mode.
quit Exit the sftp mode.