Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 785 / 2354

VRRP Commands vrrp track
OmniSwitch CLI Reference Guide March 2011 page 16-7
vrrp track
Creates a new tracking policy or modifies an existing tracking policy.
vrrp track track_id [enable | disable] [priority value] [ipv4-interface name | ipv6-interface name |
port slot/port | address address]
no vrrp track track_id
Syntax Definitions
track_id The ID of the tracking policy; the range is 1 to 255.
enable Enables the tracking policy.
disable Disables the tracking policy.
value The value to be decremented from the priority value of the virtual router
monitoring this tracking policy when the operational state of the track-
ing policy is down. The valid range is 0–255.
name The name of the IPv4 or IPv6 interface that this policy will track.
slot / port The slot/port number that this policy will track.
address The remote IP or IPv6 address that this policy will track.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a tracking policy.
•
Use the disable option to disable the tracking policy, rather than removing it from the switch.
parameter default
enable | disable enable
value 25