Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 411 / 2354

802.1AB Commands show lldp config
OmniSwitch CLI Reference Guide March 2011 page 9-33
show lldp config
Displays the general LLDP configuration information for LLDP ports.
show lldp { slot | slot/port [-port ]} config
Syntax Definitions
slot The slot number for a specific module.
slot/port Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
Defaults
By default, a list of all LLDP ports with their configuration parameters is displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Use the slot/port or slot parameter to display information for a specific port or for all ports on a specific
module.
Examples
-> show lldp config
----------+-------------------------------------------+-----------------+-------
| Admin | Notify | Std TLV | Mgmt | 802.1 | 802.3 | MED
Slot/Port| Status | Trap | Mask | Address | TLV | Mask | Mask
----------+----------+----------+----------+----------+----------+------+------
2/1 Rx + Tx Disabled 0x00 Disabled Disabled 0x00 0x00
2/2 Rx + Tx Disabled 0x00 Disabled Disabled 0x00 0x00
2/3 Rx + Tx Disabled 0x00 Disabled Disabled 0x00 0x00
2/4 Rx + Tx Disabled 0x00 Disabled Disabled 0x00 0x00
2/5 Rx + Tx Disabled 0x00 Disabled Disabled 0x00 0x00
output definitions
Slot/Port Specifies the LLDP slot and port number.
Admin Status Specifies the Administrative status of the LLDP port.The options
are - Disabled, Rx, Tx, and Rx+Tx.
Notify Trap Specifies if the Notify Trap feature is disabled or enabled on a
particular port
Std TLV Mask Specifies the standard TLV mask set for the port.
Mgmt Address Specifies whether transmission of the per port IPv4 management
address is enabled or disabled.
802.1 TLV Specifies whether 802.1 TLV status is enabled or disabled on the LLDP
port.