Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1926 / 2354

port-mirroring source destination Port Mirroring and Monitoring Commands
page 31-2 OmniSwitch CLI Reference Guide March 2011
port-mirroring source destination
Defines the port to mirror and the port that is to receive data from the mirrored port. Also, enables or
disables remote port mirroring.
port-mirroring port_mirror_sessionid source {slot/port[-port2] [slot/port[-port2]...]
destination slot/port [rpmir-vlan vlan_id] [bidirectional |inport |outport] [unblocked vlan_id]
[enable | disable]
port-mirroring port_mirror_sessionid no source {slot/port[-port2] [slot/port[-port2]...]
Syntax Definitions
port_mirror_sessionid Mirroring session identifier.
source Specifies source port, or range of ports desired to be mirrored.
no source Removes a port or range of ports from a port mirroring session.
destination Specifies the destination port, that receives all the mirrored packets.
slot/port Enter a port number.
[slot/port[-port2]...] Enter a range of port numbers.
rpmir-vlan vlan_id Specifies a reserved VLAN to carry the mirroring traffic.
bidirectional Specifies bidirectional port mirroring.
inport Specifies incoming unidirectional port mirroring.
outport Specifies outgoing unidirectional port mirroring.
unblocked vlan_id Specifies the VLAN that is to be protected from Spanning Tree changes
when port mirroring is active. Ports in this VLAN remain unblocked.
enable Enables port mirroring status.
disable Disables port mirroring status.
Defaults
Platforms Supported
OmniSwitch 10K
parameter default
bidirectional | inport | outport bidirectional
enable | disable disable