Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1437 / 2354

PIM Commands ip pim register checksum
OmniSwitch CLI Reference Guide March 2011 page 23-23
ip pim register checksum
Configures the application of the checksum function on sent and received register messages in the domain.
ip pim register checksum {header | full}
Syntax Definitions
header Specifies that the checksum for registers is done only on the PIM
header.
full Specifies that the checksum is done over the entire PIM register
message.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The full option may be required for compatibility with older implementations of PIM-SM v2.
•
This parameter setting must be consistent across the PIM domain.
•
This command is supported only in the sparse mode.
Examples
-> ip pim register checksum header
-> ip pim register checksum full
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmOldRegisterMessageSupport
parameter default
header | full header
show ip pim sparse Displays the status of the various global parameters for the PIM
sparse mode.