Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 739 / 2354

BFD Commands show ip bfd sessions statistics
OmniSwitch CLI Reference Guide March 2011 page 14-31
show ip bfd sessions statistics
Displays the statistics for all BFD sessions, a specific session or a specific slot.
show ip bfd sessions statistics session_num
Syntax Definitions
session_num The BFD session number. Valid range is 1–1024.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show ip bfd sessions statistics
Local Neighbor Tx Rx Echo Tx Last Down Up
Discr Address Packets Packets Packets Diag Code Count
------+----------------+----------+----------+----------+-----------+-------
1 100.1.1.10 0 0 5772 0 1
2 101.1.1.11 5242 5241 0 0 1
-> show ip bfd sessions statistics 1
Tx packet counter = 0,
Rx packet counter = 0,
Tx Echo packet counter = 5772,
Rx Echo packet counter = 5774,
Session Up Time = 6160400,
Session Down Time = 0,
Last Down Diagnostic Code = 0,
Session Up Count = 1
output definitions
Local discriminator The local discriminator.
Neighbor address The IP address of the BFD neighbor.
Tx Packets Number of BFD Control packets transmitted on this session.
Rx Packets Number of BFD Control packets received on this session.
Echo Tx Packets Number of BFD Echo packets transmitted on this session.
Last Down Diagnostic Code Diagnostic code for last session down event
Up Count Number of times the session has moved to an UP state since the system
was last reset or initialized.