Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 39 / 2354

Ethernet Port Commands interfaces
OmniSwitch CLI Reference Guide March 2011 page 1-3
interfaces
Enables or disables auto negotiation or administrative status on a single port, a range of ports, or an entire
Network Interface (NI).
interfaces {slot| slot/port[-port2]} {admin-state | autoneg } {enable|disable}
Syntax Definitions
slot Slot number you want to configure.
port Port number of the interface you want to configure.
port2 Last port number in a range of ports you want to configure.
admin-state enable Enables administrative state.
admin-state disable Disables administrative state.
autoneg enable Enables auto negotiation.
autoneg disable Disables auto negotiation.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If auto negotiation is disabled, auto MDIX, flow control, auto speed, and auto duplex are not accepted.
See the
interfaces crossover command on page 1-7 and the interfaces duplex command on page 1-9
for more information.
Examples
-> interfaces 3 autoneg disable
-> interfaces 3/1 autoneg disable
-> interfaces 3/1-4 autoneg disable
-> interfaces 2/1-5 admin-state enable
Release History
Release 7.1.1; command introduced.
parameter default
enable | disable enable