Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1938 / 2354

show port-monitoring status Port Mirroring and Monitoring Commands
page 31-14 OmniSwitch CLI Reference Guide March 2011
show port-monitoring status
Displays port monitoring status.
show port-monitoring status [port_monitor_sessionid]
Syntax Definitions
port_monitor_sessionid Monitoring session identifier.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If a port monitoring session identifier is not specified with this command, then all port monitoring sessions
are displayed.
Examples
-> show port-monitoring status
Sess Mon. Mon. Over Oper. Admin Capt. Max. File
Src Dir write Stat Stat Type Size Name
-----+----+----+-----+------+------+-------+------+--------------------------
1. 1/2 Out OFF OFF OFF Brief 64K /flash/pm.enc
output definitions
Sess Session - The port monitoring session identifier.
Mon. Src Monitor Source - The source ports that are monitored.
Mon Dir Monitor Direction - The direction of the monitoring session, which
can be bidirectional (the default), inport , or outport .
Overwrite Whether files created by a port monitoring session can be overwritten.
The default is ON.
Oper Stat Operating Status - The current operating status of the port monitoring
session (on/off).
Admin Stat Admin Status - The current administrative status of the port monitor-
ing session (on/off).
Capt Type Capture type -
Brief - captures only 64 bytes of data per traffic data packet.
Full - captures the entire packet.
Max Size Maximum Size - The maximum size of the port monitoring file.
File Name The name of the port monitoring file.