Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 314 / 2354

show linkagg Link Aggregation Commands
page 6-56 OmniSwitch CLI Reference Guide March 2011
Release History
Release 7.1.1; command introduced.
Related Commands
Primary Port The port number of the first port to join this dynamic aggregate group.
If the first port to join the aggregate group is no longer part of the
aggregate group, the switch automatically assigns another port in the
aggregate group to be the primary port.
MACAddress The MAC address associated with the primary port.
Actor System Id The MAC address of this dynamic aggregate group. You can modify
this parameter with the
linkagg lacp agg actor system-id command
(see page 6-20 ).
Actor System Priority The priority of this dynamic aggregate group. You can modify this
parameter with the
linkagg lacp agg actor system-priority command
(see page 6-18 ).
Actor Admin Key The administrative key associated with this dynamic aggregate group.
You can modify this parameter with the
linkagg lacp agg actor admin-
key command (see page 6-17 ).
Actor Oper Key The operational key associated with this dynamic aggregate group.
Partner System Id The MAC address of the remote dynamic aggregate group. You can
modify this parameter with the
linkagg lacp agg partner system-id
command (see page 6-22 ).
Partner System Priority The priority of the remote system to which this dynamic aggregation
group is attached. You can modify this parameter with the
linkagg lacp
agg partner system-priority command (see page 6-24 ).
Partner Admin Key The administrative key for the remote partner of the dynamic
aggregation . You can modify this parameter with the
linkagg lacp agg
partner admin-key command (see page 6-26 ).
Partner Oper Key The operational key of the remote system to which the dynamic
aggregation group is attached.
linkagg static agg size Creates a static aggregate group.
linkagg lacp agg size Creates a dynamic aggregate group.
output definitions (continued)