Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1996 / 2354

show ethernet-service vlan VLAN Stacking Commands
page 34-28 OmniSwitch CLI Reference Guide March 2011
show ethernet-service vlan
Displays a list of SVLANs configured on the switch.
show ethernet-service vlan [svlan_id-[svlan_id2]]
Syntax Definitions
svlan_id The VLAN ID number identifying the SVLAN.
-svlan_id2 The last VLAN ID number in a range of SVLANs that you want to
specify (for example 10-12 specifies VLANs 10, 11, and 12).
Defaults
By default, all SVLANs are displayed if an SVLAN or range of SVLANs are not specified with this
command.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
Specify a single SVLAN ID or a range of SVLAN IDs to display configuration information for the
specific SVLANs.
Examples
-> show ethernet-service vlan
vlan Type name
+--------+------------+-------------------------+
4010 svlan Customer ABC
4020 mgmt Provider Management
4021 svlan Customer XYZ
-> show ethernet-service vlan 1001
Name : VLAN 1001,
Type : Service Vlan,
Administrative State : enabled,
Operational State : disabled,
IP Router Port : disabled,
IP MTU : 1500
-> show ethernet-service vlan 1000-1004
vlan type admin oper ip mtu name
-----+------+-----+-----+-----+-------+------------
1000 vstk Ena Dis Dis 1500 VLAN 1000
1001 vstk Ena Dis Dis 1500 VLAN 1001
1002 vstk Ena Dis Dis 1500 VLAN 1002
1003 vstk Ena Dis Dis 1500 VLAN 1003
1004 vstk Ena Dis Dis 1500 VLAN 1004