Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1255 / 2354

Server Load Balancing Commands show ip slb probes
OmniSwitch CLI Reference Guide March 2011 page 20-47
show ip slb probes
Displays the configuration of Server Load Balancing (SLB) probes.
show ip slb probes [probe_name]
Syntax Definitions
probe_name Specifies the name of the Server Load Balancing (SLB) probe.
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
If you do not specify the name of an SLB probe then all SLB probes are displayed.
Examples
No probe name is specified:
-> show ip slb probes
Probe Name Period Retries Timeout Method
-----------------------+-------+-------+--------+------
web_server 60000 3 12000 HTTP
mail_server 60000 3 3000 SMTP
mis_servers 3600000 5 24000 Ping
Output fields are described here:
output definitions
Probe Name The user-specified name of the probe.
Period The period (in seconds) to check the health of servers.
Retries The number of probe retries before deciding that a server is out of
service.
Timeout The timeout (in seconds) used to wait for probe answers.
Method The type of probe.