Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 804 / 2354

vrrp group set VRRP Commands
page 16-26 OmniSwitch CLI Reference Guide March 2011
vrrp group set
Sets the new modified default value to all the virtual routers in a virtual router group.
vrrp group vrgid set [interval | priority | preempt | all] [override]
Syntax Definitions
vrgid The virtual router group ID, in the range from 1–255.
interval Sets the VRRP advertisement interval value to the new default value.
priority Sets the priority value to the new default value.
preempt Sets the preempt mode to the new default mode.
all Sets all the parameters’ value to the new default value.
override Overrides the parameter’s configured value with the group default
value.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
All the virtual routers must be disabled before using this command.
•
To apply the group default value to the virtual routers in a group, you must disable the virtual router
group, then apply the group default value using the
vrrp group set command and enable the virtual
router group again.
•
If any of the virtual routers in the group are running with their own configured parameter value, then
that value will take priority over the group default value. To override the configured value with the
group default value, you must first disable the virtual router group, then override the configured value
by using the
vrrp group set command with the override option and enable the virtual router group
again.
Examples
->vrrp group 10 set priority
->vrrp group 10 set priority override
Release History
Release 7.1.1; command was introduced.
parameter default
interval | priority | preempt | all all