Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 269 / 2354

Link Aggregation Commands linkagg lacp agg size
OmniSwitch CLI Reference Guide March 2011 page 6-11
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a dynamic aggregate group from the configuration.
•
You must disable the group with the linkagg lacp agg admin-state command before you can delete a
dynamic link aggregate group.
•
Optional parameters for the dynamic aggregate group can be configured when the aggregate is created.
The dynamic aggregate group can be modified after the optional parameters are assigned.
•
Use the multi-chassis active parameter to activate a dynamic link aggregate group between multiple
switch chassis. This parameter is used only in a multi-chassis link aggregation (MC-LAG) configura-
tion.
•
Use the linkagg static agg size command to create static aggregate groups. See page 6-3 for more
information about this command.
Examples
-> linkagg lacp agg 2-5 size 4
-> linkagg lacp agg 3 size 2 admin-state disable actor system-priority 65535
-> no linkagg lacp agg 2-5 size 4
Release History
Release 7.1.1; command introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggSize
alclnkaggAggLacpType
alclnkaggAggName
alclnkaggAggAdminState
alclnkaggAggActorAdminKey
alclnkaggAggActorSystemPriority
alclnkaggAggActorSystemID
alclnkaggAggPartnerSystemID
alclnkaggAggPartnerSystemPriority
parameter default
enable | disable enable
show linkagg Displays information about static and dynamic (LACP) aggregate
groups.