Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 1169 / 2354

BGP Commands show ipv6 bgp routes
OmniSwitch CLI Reference Guide March 2011 page 19-201
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaBgpRoute6Table
alaBgpRoute6Addr
alaBgpRoute6MaskLen
alaBgpRoute6State
alaBgpRoute6IsHidden
alaBgpRoute6IsAggregate
alaBgpRoute6IsAggregateContributor
alaBgpRoute6IsAggregateList
alaBgpRoute6IsAggregateWait
alaBgpRoute6IsOnEbgpChgList
alaBgpRoute6IsOnIbgpClientChgList
alaBgpRoute6IsOnIbgpChgList
alaBgpRoute6IsOnLocalChgList
alaBgpRoute6IsOnDeleteList
alaBgpRoute6IsDampened
ICL Internal BGP change list. When Yes, this route has changes that need to
be advertised.
LCL Local change list. When Yes, this route is local.
AGG Aggregation. When Yes, this route is an aggregate route.
AGC Aggregation contribution. When Yes, this route is part of an aggregate
route.
AGL Aggregation list. When Yes, this route is placed on an aggregate list.
AGW Aggregation waiting. When Yes, this route is waiting for an aggregate
contributor.
AGH Aggregation hidden. When Yes, this route is hidden as part of an aggre-
gate route.
GDL Deletion list. When Yes, this route will be deleted.
DMP Dampening. Indicate whether this route has been dampened. If ‘Yes’,
then this route has been dampened and a dampening history exists.
ACT Active route. When Yes, the route is active.
show ipv6 bgp path Displays the known IPv6 BGP paths for all the routes or a specific
route.
output definitions (continued)