Alcatel-Lucent 060321-10, Rev. B, Cli Reference Manual

Page: 322 / 2354

show linkagg range Link Aggregation Commands
page 6-64 OmniSwitch CLI Reference Guide March 2011
show linkagg range
Displays information about the configured or operational link aggregate range identifiers for standard and
MC-LAG link aggregates.
show linkagg range [operation | config]
Syntax Definitions
operation Displays the operational ranges.
config Displays the configured ranges.
Defaults
By default, both the operational and configured ranges are shown.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the operation parameter to display only the operational link aggregate identifiers.
•
Use the config parameter to display only the configured link aggregate identifiers.
•
A chassis reboot is required for the configured values to become operational.
Examples
-> show linkagg range
Operational Configured
Min Max Min Max
--------------------+--------+--------+-------------+-------+
Local 0 127 0 0
Peer 0 127 0 0
Multi-Chassis 0 127 0 127
Release History
Release 7.1.1; command introduced.
output definitions
Operational Min/Max The currently operational ranges.
Configured Min/Max The currently configured ranges.
Local The local link aggregate identifiers.
Peer The peer link aggregate identifiers.
Multi-Chassis The MC-LAG link aggregate identifiers.