Allied Telesis x510-28GPX, Справочник по командам

Страница: 742 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 742
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
OWER OVER
E
THERNET
C
OMMANDS
SHOW POWER
-
INLINE
Related
Commands
show power-inline counters
show power-inline interface
Device The description of the connected PD device if a description
has been added with the
power-inline description
command. No description is shown for PDs not configured
with the
power-inline description command.
Class The class of the connected PD, if power is being supplied to
the PD.
Max (mW) The power in milliwatts (mW) allocated for the PoE port.
Additionally, note the following as displayed per PoE port:
• [U] if the power limit for a port was user configured (with
the power-inline max command).
• [L] if the power limit for a port was supplied by LLDP.
• [C] if the power limit for a port was supplied by the PD
class.
Table 1: Parameters in the show power-inline command output (cont.)
Parameter Description