C613-50170-01 Rev B
Command Reference for x510 Series
523
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
WITCHING
C
OMMANDS
LOOP
-
PROTECTION
TIMEOUT
loop-protection timeout
Overview
Use this command to specify the Loop Protection recovery action duration on an
interface.
Use the
no
variant of this command to set the loop protection timeout to the
default.
Syntax
loop-protection timeout
<duration>
no loop-protection timeout
Default
The default is 7 seconds.
Mode
Interface Configuration
Usage
See the “Loop Protection” section in the
Switching Feature Overview and
Configuration Guide
for relevant conceptual, configuration, and overview
information prior to applying this command.
Example
To configure a loop protection action timeout of 10 seconds for
port1.0.4
, use
the command:
awplus#
configure terminal
awplus(config)#
interface port1.0.4
awplus(config-if)#
loop-protection timeout 10
Related
Commands
Parameter
Description
<duration>
The time (in seconds) for which the configured action will apply
before being disabled. This duration can be set between 0 and 86400
seconds (24 hours). The set of 0 means infinity so timeout does not
expire.
