C613-50170-01 Rev B
Command Reference for x510 Series
1035
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF C
OMMANDS
REDISTRIBUTE
(OSPF)
Example
The following example shows the configuration of a route-map named
rmap2
,
which is then applied using the
redistribute route-map
command, so routes
learned via interface vlan1 can be redistributed as type-1 external LSAs:
awplus#
configure terminal
awplus(config)#
route-map rmap2 permit 3
awplus(config-route-map)#
match interface vlan1
awplus(config-route-map)#
set metric-type 1
awplus(config-route-map)#
exit
awplus(config)#
router ospf 100
awplus(config-router)#
redistribute rip route-map rmap2
Note that configuring a route-map and applying it with the
redistribute
route-map
command allows you to filter which routes are distributed from
another routing protocol (such as RIP). A route-map can also set the metric, tag,
and metric-type of the redistributed routes.
Related
Commands
