C613-50170-01 Rev B
Command Reference for x510 Series
2208
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
G.8032 E
THERNET
R
ING
P
ROTECTION
S
WITCHING
C
OMMANDS
SHOW
G
8032
PROFILE
show g8032 profile
Overview
Use this command to show one specific G.8032 profile or all G.8032 profiles, and
the configured information within each profile.
Syntax
show g8032 profile {<
erp-profile-name
>|default-profile|all}
Mode
User Exec and Privileged Exec
Example
To show the profile details for a profile named “prof1”, use the following
command:
awplus#
show g8032 profile prof1
Output
Figure 53-5:
Example output from the
show g8032 profile
command.
Parameter
Description
<erp-profile-name>
The name of the G.8032 profile that was created by the
user.
default-profile
The default name of the G.8032 profile that was created
automatically by the system.
all
Using this will show all G.8032 profiles.
awplus#show g8032 profile prof1
Profile : prof1
===========================
Wait-To-Restore : 5 mins
Hold Off Timer : 0 ms
Guard Timer : 500 ms
Wait-To-Block : 5500 ms
Protection Type : Revertive
ERP Inst : blue
Table 4:
Parameters in the output from
show g8032 profile
command.
Parameter
Description
Wait-To-Restore
The configured value in <1-12> minutes.
Hold Off Timer
The configured value but shown instead in milliseconds
which ranges from 0 to 10,000 (10s) in 100 ms increments.
Wait-To-Block
5 seconds more than the configured Guard Time. The
range is 5010 to 5200.
ERP Inst
Comma separated list of ERP instances using this profile,
or "-" if there are none.
