C613-50170-01 Rev B
Command Reference for x510 Series
1413
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM
V
6 C
OMMANDS
SHOW
DEBUGGING
IPV
6
PIM
SPARSE
-
MODE
show debugging ipv6 pim sparse-mode
Overview
This command displays the status of the PIM-SMv6 debugging on your device.
For information on filtering and saving command output, see the
“Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide
.
Syntax
show debugging ipv6 pim sparse-mode
Mode
User Exec and Privileged Exec
Example
To display PIM-SMv6 debugging settings, use the command:
awplus#
show debugging ipv6 pim sparse-mode
Figure 34-2:
Example output from the
show debugging ipv6 pim
sparse-mode
command
Related
commands
awplus#show debugging ipv6 pim sparse-mode
Debugging status:
PIM event debugging is on
PIM MFC debugging is on
PIM state debugging is on
PIM packet debugging is on
PIM Hello HT timer debugging is on
PIM Hello NLT timer debugging is on
PIM Hello THT timer debugging is on
PIM Join/Prune JT timer debugging is on
PIM Join/Prune ET timer debugging is on
PIM Join/Prune PPT timer debugging is on
PIM Join/Prune KAT timer debugging is on
PIM Join/Prune OT timer debugging is on
PIM Assert AT timer debugging is on
PIM Register RST timer debugging is on
PIM Bootstrap BST timer debugging is on
PIM Bootstrap CRP timer debugging is on