C613-50170-01 Rev B
Command Reference for x510 Series
2050
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
O
PEN
F
LOW
C
OMMANDS
SHOW
OPENFLOW
CONFIG
Related
Commands
fail_mode
The fail mode. When the fail mode is “secure,” OpenFlow
on the switch does not set up flows when the OpenFlow
Controller fails.
When the fail mode is “standalone”, OpenFlow on the
switch sets up flows to work as a Layer 2 switch when the
OpenFlow Controller fails.
Port
The port information
Interface
The interface of the port.
type:
The type of the port
options:
The options for the port
Table 49-1: Parameters in the output from
show openflow config
(cont.)
Parameter
Description
