C613-50170-01 Rev B
Command Reference for x510 Series
433
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
OGGING
C
OMMANDS
LOG
MONITOR
(
FILTER
)
log monitor (filter)
Overview
This command creates a filter to select messages to be sent to the terminal when
the
command is given. Selection can be based on the
priority/severity of the message, the program that generated the message, the
logging facility used, a sub-string within the message or a combination of some or
all of these.
Syntax
log monitor [level
<level>
] [program
<program-name>
] [facility
<facility>
] [msgtext
<text-string>
]
no log monitor [level
<level>
] [program
<program-name>
]
[facility
<facility>
] [msgtext
<text-string>
]
Parameter
Description
level
Filter messages by severity level.
<
level
>
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
System is unusable
1|alerts
Action must be taken immediately
2|critical
Critical conditions
3|errors
Error conditions
4|warnings
Warning conditions
5|notices
Normal, but significant, conditions
6|informational
Informational messages
7|debugging
Debug-level messages
program
Filter messages by program. Include messages from a specified program.
<
program-
name
>
The name of a program to log messages from, either one of the following predefined program
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rip
Routing Information Protocol (RIP)
ripng
Routing Information Protocol - next generation (RIPng)
ospf
Open Shortest Path First (OSPF)
ospfv3
Open Shortest Path First (OSPF) version 3 (OSPFv3)
rsvp
Resource Reservation Protocol (RSVP)
pim-dm
Protocol Independent Multicast - Dense Mode (PIM-DM)
pim-sm
Protocol Independent Multicast - Sparse Mode (PIM-SM)
pim-smv6
PIM-SM version 6 (PIM-SMv6)
dot1x
IEEE 802.1X Port-Based Access Control
