Allied Telesis x510-28GPX, Справочник по командам

Страница: 440 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 440
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
L
OGGING
C
OMMANDS
LOG PERMANENT
(
FILTER
)
log permanent (filter)
Overview This command creates a filter to select messages to be sent to the permanent log.
Selection can be based on the priority/ severity of the message, the program that
generated the message, the logging facility used, a sub-string within the message
or a combination of some or all of these.
The no variant of this command removes the corresponding filter, so that the
specified messages are no longer sent to the permanent log.
Syntax
log permanent [level <level> ] [program <program-name> ]
[facility <facility> ] [msgtext <text-string> ]
no log permanent [level <level> ] [program <program-name> ]
[facility <facility> ] [msgtext <text-string> ]
Parameter Description
level
Filter messages sent to the permanent log by severity level.
< level >
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
System is unusable
1|alerts
Action must be taken immediately
2|critical
Critical conditions
3|errors
Error conditions
4|warnings
Warning conditions
5|notices
Normal, but significant, conditions
6|informational
Informational messages
7|debugging
Debug-level messages
program
Filter messages by program. Include messages from a specified program.
< program-
name >
The name of a program to log messages from, either one of the following predefined program
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rip
Routing Information Protocol (RIP)
ripng
Routing Information Protocol - next generation (RIPng)
ospf
Open Shortest Path First (OSPF)
ospfv3
Open Shortest Path First (OSPF) version 3 (OSPFv3)
rsvp
Resource Reservation Protocol (RSVP)
pim-dm
Protocol Independent Multicast - Dense Mode (PIM-DM)
pim-sm
Protocol Independent Multicast - Sparse Mode (PIM-SM)
pim-smv6
PIM-SM version 6 (PIM-SMv6)