Allied Telesis x510-28GPX, Справочник по командам

Страница: 1425 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1425
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
PIM-SM
V
6 C
OMMANDS
SHOW IPV
6
PIM SPARSE
-
MODE NEXTHOP
show ipv6 pim sparse-mode nexthop
Overview Use this command to see the next hop information as used by PIM-SMv6.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide .
Syntax show ipv6 pim sparse-mode nexthop
Mode User Exec and Privileged Exec
Example awplus# show ipv6 pim sparse-mode nexthop
Figure 34-11: Example output from the show ipv6 pim sparse-mode nexthop
command
awplus#show ipv6 pim sparse-mode nexthop

Flags: N = New, R = RP, S = Source, U = Unreachable

Destination Type Nexthop Nexthop Nexthop Nexthop Metric Pref Refcnt

Num Addr Ifindex Name

_____________________________________________________________________________________

3ffe:10:10:5::153 .RS. 1 fe80::20e:cff:fe01:facc 2 30 110 1

Table 2: Parameters in output of the show ipv6 pim sparse-mode nexthop
command
Parameter Description
Destination
The destination address for which PIM-SMv6 requires next hop
information.
Type
The type of destination, as indicated by the Flags description. N =
New, R= RP, S = Source, U = Unreachable.
Nexthop Num
The number of next hops to the destination. PIM-SMv6 always
uses only 1 next hop.
Nexthop Addr
The address of the primary next hop gateway.
Nexthop
IfIndex
The interface on which the next hop gateway can be reached.
Nexthop Name
The name of next hop interface.
Metric
The metric of the route towards the destination.
Preference
The preference of the route towards destination.
Refcnt
Only used for debugging.