C613-50170-01 Rev B
Command Reference for x510 Series
247
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
FINDME
To activate the Find Me feature for the default duration (60 seconds) on switch port
interfaces port1.0.2 through port1.0.4, use the following command:
awplus#
findme interface port1.0.2-1.0.4
In the example above, ports 2 to 4 will flash 4 times and then all ports will flash
twice. Each alternate flash will be amber (if that device has amber LEDs). This
pattern will repeat until
timeout
(default or set) or
no
findme
commands are used.
To deactivate the Find Me feature, use the following command:
awplus#
no findme
To activate the Find Me feature for the default duration on stack member 2, use the
following command:
awplus#
findme member 2
In the example above, all ports on member 2 will flash 4 times and then all ports in
the stack will flash twice. Each alternate flash will be amber (if that device has
amber LEDs). This pattern will repeat until the timeout (default or set) expires or
the
no findme
command is used.
