C613-50170-01 Rev B
Command Reference for x510 Series
1096
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF
V
3
FOR
IP
V
6 C
OMMANDS
AUTO
-
COST
REFERENCE
BANDWIDTH
(IP
V
6 OSPF)
Calculation result = 0.1
Result after rounding up to the nearest integer = 1 (Interface cost is 1)
The auto-cost reference bandwidth value should be consistent across all OSPF
routers in the OSPF process.
Note that using the
command on a layer 3 interface will override the
cost calculated by this command.
Mode
Router Configuration
Example
awplus#
configure terminal
awplus(config)#
router ipv6 ospf 20
awplus(config-router)#
auto-cost reference-bandwidth 1000
Related
Commands