C613-50170-01 Rev B
Command Reference for x510 Series
316
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
P
LUGGABLES
AND
C
ABLING
C
OMMANDS
SHOW
SYSTEM
PLUGGABLE
DETAIL
•
Power Monitoring
: Displays the received power measurement type, which
can be either
OMA
(Optical Module Amplitude) or
Avg
(Average Power)
measured in μW.
NOTE
:
For parameters that are not supported or not specified, a hyphen is displayed
instead.
Example
To display detailed information about the pluggable transceivers installed in a
particular port on the device, use a command like:
awplus#
show system pluggable port1.0.25 detail
To display detailed information about all the pluggable transceivers installed on
the device, use the command:
awplus#
show system pluggable detail
Output
Figure 8-4:
Example output from
show system pluggable detail
for a specific
port on a device
awplus#show system pluggable port1.0.25 detail
System Pluggable Information Detail
Port1.0.25
==========
Vendor Name: AGILENT
Device Name: HFCT-5710L
Device Revision: A
Device Type: 1000BASE-LX
Serial Number: 0402142241184360
Manufacturing Datecode: 040214
SFP Laser Wavelength: -
Link Length Supported
Single Mode Fiber : 10Km
OM1 (62.5um) Fiber: 550m
OM2 (50um) Fiber : 550m
Diagnostic Calibration: Internal
Power Monitoring: Avg
FEC BER support: -
Table 8-1: Parameters in the output from
show system pluggable detail
Parameter
Description
Stack member
The stack member number.
Port
Specifies the port the pluggable transceiver is installed in.
Vendor Name
Specifies the vendor’s name for the installed pluggable
transceiver.
Device Name
Specifies the device name for the installed pluggable
transceiver.
