Allied Telesis x510-28GPX, Справочник по командам

Страница: 108 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 108
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
F
ILE AND
C
ONFIGURATION
M
ANAGEMENT
C
OMMANDS
Similarly, you can specify the USB storage device base directory with usb or usb:
or usb:/
You cannot name a directory or subdirectory flash , nvs , usb , card , tftp , scp , sftp
or http. These keywords are reserved for tab completion when using various file
commands.
In a stacked environment you can only access
flash
and
nvs
using the stack
member filepath (e.g.
dir awplus-2/flash:/
). To access a USB storage
device on a backup stack member, use the remote-login command.
Command List • “ autoboot enable ” on page 110
• “ boot config-file ” on page 111
• “ boot config-file backup ” on page 113
• “ boot system ” on page 114
• “ boot system backup ” on page 116
• “ cd ” on page 117
• “ copy (filename) ” on page 118
• “ copy current-software ” on page 120
• “ copy debug ” on page 121
• “ copy running-config ” on page 122
• “ copy startup-config ” on page 123
• “ copy zmodem ” on page 124
• “ create autoboot ” on page 125
• “ delete ” on page 126
• “ delete debug ” on page 127
• “ dir ” on page 128
• “ edit ” on page 130
• “ edit (filename) ” on page 131
• “ erase factory-default ” on page 132
• “ erase startup-config ” on page 133
• “ ip tftp source-interface ” on page 134
• “ ipv6 tftp source-interface ” on page 135
• “ mkdir ” on page 136
• “ move ” on page 137
• “ move debug ” on page 138
• “ pwd ” on page 139
• “ rmdir ” on page 140
• “ show autoboot ” on page 141