C613-50170-01 Rev B
Command Reference for x510 Series
2383
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
A
LLIED
T
ELESIS
M
ANAGEMENT
F
RAMEWORK
™ (AMF) C
OMMANDS
SHOW
ATMF
LINKS
GUEST
show atmf links guest
Overview
This command displays information about guest nodes visible to an AMF device.
Syntax
show atmf links guest [interface <
interface-range
>]
Default
With no parameters specified this command will display its standard output for all
ports with guest nodes connected.
Mode
User Exec/Privileged Exec
Usage
Use this command to display the guest nodes connected to a single parent node.
If you want to see a list of all the guests in the AMF network, use
Example 1
To display information about AMF guests that are connectible from node1, use the
command:
node1#
show atmf links guest
Output
Figure 54-20: Example output from
show atmf links guest
Parameter
Description
interface
<
interface-range
>
Select a specific range of ports to display information about
guest nodes.
node1#sh atmf links guest
Guest Link Information:
DC = Discovery configuration
S = static D = dynamic
Local Guest Model MAC IP / IPv6
Port Class Type DC Address Address
---------------------------------------------------------------
1.0.1 - other D 0013.1a1e.4589 192.168.1.2
1.0.2 aastra-phone other D 0008.5d10.7635 192.168.1.3
1.0.3 cisco-phone2 other S - 192.168.2.1
1.0.4 panasonic... other D 0800.239e.f1fe 192.168.1.5
Table 54-1: Parameters in the output from
show atmf links guest
Parameter
Description
Local Port
The port on the parent node that connects to the guest.
Guest Class
The name of the ATMF guest-class that has been assigned
to the guest node by the
command.
