Allied Telesis x510-28GPX, Справочник по командам

Страница: 796 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 796
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
IP A
DDRESSING AND
P
ROTOCOL
C
OMMANDS
IP TCP SYNACK
-
RETRIES
ip tcp synack-retries
Overview Use this command to specify how many times the switch will retry sending a SYN
ACK for a TCP connection for which it has received a SYN but not an ACK. Such
connections are called half-open TCP connections. This command allows you to
influence how long half-open TCP connections take to time out.
Use the no variant of this command to return to the default setting of 5 retries.
Syntax ip tcp synack-retries < 0-255 >
no ip tcp synack-retries
Default 5 retries
Mode Global Configuration
Usage The following table shows the approximate correlation between the number of
retries and the time half-open TCP connections take to time out.
Example To retry twice, which leads to a timeout of approximately 7 seconds, use the
commands:
awplus# configure terminal
awplus(config)# ip tcp synack-retries 2
Related
Commands
show running-config
Command
changes
Version 5.4.7-0.2: command added
Parameter Description
<0-255>
Number of times to retry sending the SYN ACK
Number of retries Approximate lower bound for the timeout
0 retries 1 second
1 retry 3 seconds
2 retries 7 seconds
3 retries 15 seconds
4 retries 31 seconds
5 retries 63 seconds