C613-50170-01 Rev B
Command Reference for x510 Series
359
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
C
ONNECTIVITY
F
AULT
M
ANAGEMENT
C
OMMANDS
SHOW
ETHERNET
CFM
MAINTENANCE
-
POINTS
LOCAL
MEP
CC State
The MEP's CCM configured administrative state:
Up: Enable
Down: Disable.
CC Type
The configured CCM sending and receiving type, either
multicast or unicast. If not yet configured, it shows as
None.
Tx-RDI
Whether this local MEP is sending RDI or not. An RDI is
sent when one or more of the following defects have been
declared by the local MEP:
someRMEPCCMdefect
someMACstatusDefect
errorCCMdefect
xconCCMdefect
Current Defects
A list of defects the local MEP is currently detecting. It
shows the defect(s), as both a defect priority and name.
Current Highest
Defect Alarm
The highest defect priority that has been encountered
while the local MEP has been in an alarm state.
Alarm Minimum
Defect
The minimum defect the local MEP has to see before
declaring an alarm.
Alarm Trip Time
The amount of time the defect has to exist before an alarm
is declared.
Configured Remote
MEP IDs
A comma separated list of configured remote MEPs (by
MEP IDs) known by this local MEP. If the remote MEP also
has a configured unicast MAC address, the MEP ID will also
include -HHHH.HHHH.HHHH.
Missing Remote
MEPs
The remote MEPs (by MEP ID) that have been configured
against this local MEP but have not been heard from.
Table 9-5: Parameters in the output from
show ethernet cfm
maintenance-points local mep domain <domain-name> service
<ma-name> mep <mep-id> details
(cont.)
Parameter
Description
