Allied Telesis x510-28GPX, Справочник по командам

Страница: 1836 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 1836
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
AAA C
OMMANDS
AAA ACCOUNTING DOT
1
X
• group radius : use all RADIUS servers configured by radius-server host
command.
• group < group-name> : use the specified RADIUS server group configured
with the aaa group server command.
The accounting event to send to the RADIUS server is configured by the following
options:
• start-stop : sends a start accounting message at the beginning of a session
and a stop accounting message at the end of the session.
• stop-only : sends a stop accounting message at the end of a session.
• none : disables accounting.
Examples To enable RADIUS accounting for 802.1X-based authentication, and use all
available RADIUS Servers, use the commands:
awplus# configure terminal
awplus(config)# aaa accounting dot1x default start-stop group
radius
To disable RADIUS accounting for 802.1X-based authentication, use the
commands:
awplus# configure terminal
awplus(config)# no aaa accounting dot1x default
To enable a named RADIUS accounting method list 'vlan10_acct' for 802.1X-based
authentication, with the RADIUS server group 'rad_group_vlan10, use the
commands:
awplus# configure terminal
awplus(config)# aaa accounting dot1x vlan10_acct start-stop
group rad_group_vlan10
To disable a named RADIUS accounting method list 'vlan10_acct' for 802.1X-based
authentication, use the commands:
awplus# configure terminal
awplus(config)# no aaa accounting dot1x vlan10_acct
Related
Commands
aaa accounting update
aaa authentication dot1x
aaa group server
dot1x accounting
dot1x port-control
radius-server host
show aaa server group